Valerie Johnson on mon 22 jul 02
I brushed my shelves with ITC 100. Before brushing, I dampened the shelves
with a sponge so I was able to get a THIN coat of ITC, as everyone advocates
is the goal. It worked fine this way.
Valerie Johnson
Eads, TN
Paulette Carr on mon 22 jul 02
Hi, Joyce, and anyone else who has done this ...
I have been reading the archives for advise on ITC. I am trying to repair
the floor of my kiln (submitted earlier to Clayart), and thought that ITC
might be the way to go. I would like to brush the floor with ITC 100,
avoiding the elements, patch with 200, and rebrush with 100. I read that you
brushed your shelves with ITC, and I was hoping that you would be able to
offer some advise/information on the technique.
Just to forestall any spraying suggestions, I don't have a compressor, and
won't be able to get one.
Thanks, in advance
Tommy Humphries on tue 23 jul 02
While it is certainly possible to brush ITC 100 I would recommend using a
small roller instead...Pour your ITC out into a roller pan and go for
it...it is much easier to keep stirred up this way, just remember to work on
a good wet surface, or you will quickly end up with 1/4" of coating.
Tommy
| |
|
