Michele Williams on sun 4 aug 02
In case you can't get through to the picture, it IS there. You have to copy
the entire URL, including the "equal" sign that apparently isn't included in
the link text. Go here to see a pretty nice photo. And remember, you have
to start copying at the right end where the un-included equal sign is or the
program will automatically flip you to a non-operating URL.
http://members4.clubphoto.com/_cgi-bin/getImage.pl?imgID=11759679-1ebb&trans
=
FYI, here is the original text about the glazes in the photo.
Michele Williams
You will see there this glaze
SPECKLES3134GREEN
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Cone 6 1222 deg.C. -
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
FRIT 3134 27.60
Cryolite 7.40
BALL CLAY AK 26.70
Magnesium Carb Light 1.00
SILICA 37.20
Rutile 5.00
Red Iron Oxide 1.50
Copper oxide black 4.00
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Seger Weight%
KNO 0.442 6.29%
CaO 0.441 5.67%
MgO 0.117 1.08%
Al2O3 0.460 10.74%
B2O3 0.405 6.47%
SiO2 4.674 64.41%
TiO2 0.291 5.34%
Na2O 0.442 6.29%
Al:Si 10.17
Expan. 7.49
ST 334.02
As it is on several claybodies
And you will say: Shame on you Ababi
You will see it as a part of my "combination", above this revised glaze. I
improved the
glaze by decreasing the feldspar adding frit that gave me room for more
kaolin that
was very low in the first recipe I used. Both recipes are good, according to
your raw
materials:
FOLLOW KOREN 27 1# (layer one)
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Cone 6
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
SILICA 29.00
Calcium Carbonate 12.00
EPK Kaolin 14.00
ZINC OXIDE 10.00
Custer feldspar 13.00
STRONTIUM CARBONATE 7.00
FRIT 3110 15.00
And
FOLLOWS KOREN 27 #2 (layer one)
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Cone 6
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
SILICA 31.50
Calcium Carbonate 12.00
EPK Kaolin 13.50
ZINC OXIDE 10.00
Nepheline Syenite 10.00
STRONTIUM CARBONATE 7.00
FRIT 3110 16.00
The glaze is very similar to Xavier , glossier.
You may try to add copper oxide 5'6,7, until it start being gray green,
than I belive will
be in its best
Merry glazing and happy poting
Ababi Sharon
Glaze addict
Kibbutz Shoval Israel
localpotter@walla.co.il
http://members4.clubphoto.com/ababi306910/
http://www.milkywayceramics.com/cgallery/asharon.htm
| |
|