Ron Roy on sat 14 sep 02
fired to cone 6 ox.
I got a similar (same alumina and silica ) Seger formula when I dded frit
3134 instead of Alisa's frit - yes the expansion is high even then and it
will craze. Note all the soluble soda in this one - it will move as the
glaze dries and that can be used as a decorative element.
If I were trying to get more colour I would add 5 to 20 lowfire red clay
and increase the frit up to 20 to get more melt - worth a try.
>Glaze test for Malcolm Davis Shino, cone 10 redux., fired to cone 6, ox.
>Glaze tested on white midrange stoneware fired in electric oxidation to 1220c.
>
>Source: Clayart
>Credited to: Malcolm Davis
>
>Firing ramp:
>100c p/h to 600c (212f - 1112f)
>150c p/h to 1100c (330f - 2012f)
>100c p/h to 1220c (212f - 2228f)
>cool down max. per hour to 1100c
>cool 80c per hour to 800c
>shut off kiln
>
>Recipe:
>
>40.91 Neph. Syenite
>17.27 Soda Ash
>9.82 Kona F4 Soda spar
>18.18 EPK
>13.82 OM4
>Substitutions:
>Added 10% Borax Frit to above recipe.
>
>Results:
>All white, thick, covering shino glaze. Crazed.
>
>Regards from Alisa in Denmark
Ron Roy
RR#4
15084 Little Lake Road
Brighton, Ontario
Canada
K0K 1H0
Phone: 613-475-9544
Fax: 613-475-3513
| |
|
