search  current discussion  categories  kilns & firing - cones & controllers 

need name for cone shaped pots

updated fri 27 sep 02

 

mudslingers@ATT.NET on thu 26 sep 02


clayheads,

anybody know if there is a name for pots that have a cone shaped bottom? (they
have to sit in stands that hold them vertical)

i make this shape with lids (and it is also the shape of my "logo"), but i
don't know what to call them!

i know they are not "amphoras" because the dictionary says amphoras have "large
oval bodies with a narrow cylindrical neck and 2 handles that rise almost to
the level of the mouth". and that does not describe my "cone shaped pots" (very
boring name, dontcha think?)

thanks (from the lexically challenged (among other idiosyncracies) potter),
lauren

--
Lauren Bellero
Mudslingers Pottery
Red Bank, NJ 07701
http://mudslingers.home.att.net
732.747.4853

Rob Van Rens on thu 26 sep 02


Call them "Belleros", perhaps?

Robert Van Rens, Workshop Coordinator
Otto Kroeger Associates
703-591-6284, x110 Phone
703-591-8338 Fax
www.typetalk.com

-----Original Message-----
From: mudslingers@ATT.NET [mailto:mudslingers@ATT.NET]
Sent: Thursday, September 26, 2002 2:31 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: need name for cone shaped pots


clayheads,

anybody know if there is a name for pots that have a cone shaped bottom?
(they
have to sit in stands that hold them vertical)

i make this shape with lids (and it is also the shape of my "logo"), but i
don't know what to call them!

i know they are not "amphoras" because the dictionary says amphoras have
"large
oval bodies with a narrow cylindrical neck and 2 handles that rise almost to
the level of the mouth". and that does not describe my "cone shaped pots"
(very
boring name, dontcha think?)

thanks (from the lexically challenged (among other idiosyncracies) potter),
lauren

--
Lauren Bellero
Mudslingers Pottery
Red Bank, NJ 07701
http://mudslingers.home.att.net
732.747.4853

____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org

You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

Charles Moore on thu 26 sep 02


Lauren,

I think you can feel free to call your cone shaped pots, with lids,
"amphora" (amphorae in the plural). In the early 20th century, in the Arts
and Crafts period, the Fulper art pottery made a vase with a very
constricted bottom mounted on a small base and used no handles. Fulper
referred to these pots as amphora, even though they were mounted on a base.

And aside: I have two Fulper amphora pots. Every such Fulper that I have
seen is slightly off kilter, i.e., it leans slightly. Since their pottery
was almost entirely made in molds, the tilt did not seem to bother them.

Charles
Sacramento, where the temperature is forecast to drop below 100 degrees for
the first time in many days.
----- Original Message -----
From:
To:
Sent: Wednesday, September 25, 2002 11:30 PM
Subject: need name for cone shaped pots


> clayheads,
>
> anybody know if there is a name for pots that have a cone shaped bottom?
(they
> have to sit in stands that hold them vertical)
>
> i make this shape with lids (and it is also the shape of my "logo"), but i
> don't know what to call them!
>
> i know they are not "amphoras" because the dictionary says amphoras have
"large
> oval bodies with a narrow cylindrical neck and 2 handles that rise almost
to
> the level of the mouth". and that does not describe my "cone shaped pots"
(very
> boring name, dontcha think?)
>
> thanks (from the lexically challenged (among other idiosyncracies)
potter),
> lauren
>
> --
> Lauren Bellero
> Mudslingers Pottery
> Red Bank, NJ 07701
> http://mudslingers.home.att.net
> 732.747.4853
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

Cheryl Hoffman on thu 26 sep 02


Hi Lauren,
I took a look in my "Potter's Directory of Shape and Form" (Neal
French). There is such a shape classification as "cone". The examples that
were shown had very teeny-tiny flat bottoms but what you describe does sound
like a covered cone shaped vessel.
Hope that was some help.
Cher Hoffman
New Port Richey, FL.

Carol Tripp on thu 26 sep 02


Hi Lauren,
My dictionary has the same definition of amphorae but the next word down the
page is amphoral :"(adjective) pertaining to or resembling an amphora". So
you could call your pots amphoral pots because they do "resemble" amphorae
and unless you get some know-it-all, you should be ok.
Best regards,
Carol
Dubai, UAE
Lots of amphorae on display here, outside homes. No danger of freeze/thaw!
(I've told my kids that if it ever snows in Dubai, they will get TV's in
their bedrooms. Ha.)

Lauren wrote, in part:
>i know they are not "amphoras" because the dictionary says amphoras have
>"large
>oval bodies with a narrow cylindrical neck and 2 handles that rise almost
>to
>the level of the mouth".




_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com