search  current discussion  categories  kilns & firing - raku 

fergy raku kilns at www.aquariusartgallery.com

updated thu 31 oct 02

 

Tony Ferguson on wed 30 oct 02


Brian,

You may want to look at my plans to aid you in you design of your raku kiln:

http://www.aquariusartgallery.com/fergusonartistrakukilnbuildingplans.htm

Thank you.

Tony Ferguson
On Lake Superior, where the sky meets the Lake

Stoneware, Porcelain, Raku
www.aquariusartgallery.com
218-727-6339
315 N. Lake Ave
Apt 312
Duluth, MN 55806


----- Original Message -----
From: "Brian Crocker" <4708777bc@ESC.NET.AU>
To:
Sent: Tuesday, October 29, 2002 10:29 PM
Subject: Re: raku kiln


> Hallo Phil,
>
> Can I also have pics of your Kiln please ?
>
> I'm happy to pay for the pics and potstage.
>
> Kind regards,
>
> CROC from Oz.
> ================================
> ----- Original Message -----
> From: "Phil Smith"
> To:
> Sent: Wednesday, October 30, 2002 6:03 AM
> Subject: Re: raku kiln
>
>
> > Joan,
> > I have built two Raku units out of 55 Gallon oil drums.
> > I can give you plans if you like.
> > These are not however the lift off type.
> > They have a lid that you remove when pots are ready.
> > Very portable and economical to build.
> > Great if you fire solo.
> > Also can fire pots 24" tall...
> > I imagine you can make a smaller one with a 30 gallon oil drum
> > which could be inverted to make it a lift off type.
> > The plans are simple. Just have to recalculate the materials list
> > and dimensions for drilling if going with smaller drum.
> > Let me know, I can send pics if you like.
> > Phil:
> >
> >
>
____________________________________________________________________________
> __
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or change your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
> >
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>