search  current discussion  categories  kilns & firing - raku 

raku glaze problem again

updated sun 10 nov 02

 

Dewitt on thu 7 nov 02


Try taking a look at Tom Buck's article at
http://www.digitalfire.com/education/glaze/buckraku.htm

deg

At 12:44 11/7/02 -0800, you wrote:
>Hey everybody, I didn't get any bites on my problem of how to alter a Raku
>glaze so that it doesn't become muddy in 5 years--the glazes with copper.
>
>Thanks, Carolyn
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.

---------------------------
Dewitt Gimblet
Austin, Tx
---------------------------

Megan Ratchford on thu 7 nov 02


Hi! Go to www.digitalfire.com and look up Tom Buck's article on no-fade
raku glazes. He explains a huge amount of information and gives sample
glazes. A wonderful read if you're into that sort of thing! ;)
Megan
In Colorado still smelling like raku smoke from my class tonight...
----- Original Message -----
From: "Carolyn Bronowski"
To:
Sent: Thursday, November 07, 2002 1:44 PM
Subject: Raku glaze problem again


> Hey everybody, I didn't get any bites on my problem of how to alter a Raku
> glaze so that it doesn't become muddy in 5 years--the glazes with copper.
>
> Thanks, Carolyn
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

Carolyn Bronowski on thu 7 nov 02


Hey everybody, I didn't get any bites on my problem of how to alter a Raku
glaze so that it doesn't become muddy in 5 years--the glazes with copper.

Thanks, Carolyn

Tom Buck on fri 8 nov 02


Paul Gerhold is wrong when he states my raku glazes do not work -- many
potters since 1996 have said nice things about the glaze recipes there.
raku process is not easy to control if you vary glaze coat, duration in
kiln, time in bucket, type of material in the bucket. raku firings need
consistency.
peace. Tom B.

Tom Buck ) -- primary address.
"alias" or secondary address.
tel: 905-389-2339 (westend Lake Ontario, province of Ontario, Canada).
mailing address: 373 East 43rd Street, Hamilton ON L8T 3E1 Canada

Sandy Cryer on fri 8 nov 02


Try this web site, it has lots of interesting info on raku stability.
http://digitalfire.com/education/glaze/buckraku.htm

Sandy Cryer

Paul Gerhold on fri 8 nov 02


Carolyn,
Go to the DigitalFire web site and read the article "Now you see it now you
don't".He has some ideas on solving the problem with the caveat that his
ideas are untested. If his great ideas are like many of mine they probably
won't work but will give you a starting point.
Other people have talked about sealing the glaze with a clear acrylic spray
which probably will work for a short time. In my opinon this is a way
underfired glaze that won't hold up over time no matter what you do to it so
putting it on pots is probably ethically questionable at best.
Paul

bob huskey on fri 8 nov 02


I have a related question. With an in-glaze luster (such as that on Beatrice
Woods' pots) the luster doesn't fade with age. Is this because: The
glaze,which is similar to a Raku glaze' is reduced at a higher temperature
;or over a longer period of time? Or maybe because there is more silica in
the glaze?


Bob Huskey --- Tallahassee,Florida

----- Original Message -----
From: "Carolyn Bronowski"
To:
Sent: Thursday, November 07, 2002 3:44 PM
Subject: Raku glaze problem again


> Hey everybody, I didn't get any bites on my problem of how to alter a Raku
> glaze so that it doesn't become muddy in 5 years--the glazes with copper.
>
> Thanks, Carolyn
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
>

Tom Buck on sat 9 nov 02


Bob H:
there are different lustres - oil (resin) lustres for use at Cone
022 with no reduction involved, the colour components are built-in and are
stable. There is a book available that explains these types.
and then there are Raku lustres - copper compounds produce either
reds or bright penny, suitably combined with other components; silver and
bismuth compounds produce mother-of-pearl and gold; and other materials
produce the matts (eg, cobalt/phosphorus "coppersand", "alligator" and
"rainbow"). the Raku lustres require consistent firings/reductions.
later. peace. Tom B.

Tom Buck ) -- primary address.
"alias" or secondary address.
tel: 905-389-2339 (westend Lake Ontario, province of Ontario, Canada).
mailing address: 373 East 43rd Street, Hamilton ON L8T 3E1 Canada