L. P. Skeen on mon 16 dec 02
I have a Brent CXC on loan from a friend and it has started that nasty =
chirping for which Brents are most famous. :( Is there any way to stop =
it?
L. P. Skeen www.living-tree.net
Living Tree Studios, Summerfield, NC
"I have yet to hear a man ask for advice=20
on how to combine a marriage and career."
John Rodgers on tue 17 dec 02
I use a parafin block to stop squeaks on my vehicles fan belts. Don't
know why it wouldn't work on the Brent CXC. Just press the block on the
pully side of the belt while it is running. Watch you hands!!
John Rodgers
Birmingham, AL
John ?RodgL. P. Skeen wrote:
> I have a Brent CXC on loan from a friend and it has started that nasty chirping for which Brents are most famous. :( Is there any way to stop it?
>
>
>
> L. P. Skeen www.living-tree.net
> Living Tree Studios, Summerfield, NC
> "I have yet to hear a man ask for advice
> on how to combine a marriage and career."
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
John Britt on tue 17 dec 02
L.P. Skeen,
I would start with earplugs.
Seriously, you could try belt dressing and lubricate the head bearings.
But,in my limited experience, it is tough to completely eliminate. I am
sure that there are better minds than mine who have done it though.
Good luck,
John
bruec@anv.net on tue 17 dec 02
Turn off the wheel? :)
Original Message:
-----------------
From: L=2E P=2E Skeen lpskeen@living-tree=2Enet
Date: Mon, 16 Dec 2002 23:35:20 -0500
To: CLAYART@LSV=2ECERAMICS=2EORG
Subject: #@%&*!!! Brent Chirp
I have a Brent CXC on loan from a friend and it has started that nasty
chirping for which Brents are most famous=2E :( Is there any way to stop=
it?
L=2E P=2E Skeen www=2Eliving-tree=2Enet
Living Tree Studios, Summerfield, NC
"I have yet to hear a man ask for advice=20
on how to combine a marriage and career=2E"
__________________________________________________________________________=
__
__
Send postings to clayart@lsv=2Eceramics=2Eorg
You may look at the archives for the list or change your subscription
settings from http://www=2Eceramics=2Eorg/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink=2Ecom=2E
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web=2Ecom/ =2E
Clay Art Information on wed 18 dec 02
John Britt wrote:
>L.P. Skeen,
>
>I would start with earplugs.
>
>Seriously, you could try belt dressing and lubricate the head bearings.
>But,in my limited experience, it is tough to completely eliminate. I am
>sure that there are better minds than mine who have done it though.
>
>Good luck,
>
>John
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
>
>
Try to check the brushes inside the motor, it may need replacement, it
may be worn out.
Best regards,
Arthur
scott lykens on wed 18 dec 02
pretty much, its belt dressing or new belts. Kind of how non asbestos brake
shoes just queek on some cars no matter what you do.
>From: John Britt
>Reply-To: Clayart
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: Re: #@%&*!!! Brent Chirp
>Date: Tue, 17 Dec 2002 10:16:33 -0500
>Received: from mc4-f13.law16.hotmail.com ([65.54.237.148]) by
>mc4-s1.law16.hotmail.com with Microsoft SMTPSVC(5.0.2195.5600); Tue, 17 Dec
>2002 13:04:44 -0800
>Received: from mercury.acers ([209.115.31.35]) by mc4-f13.law16.hotmail.com
>with Microsoft SMTPSVC(5.0.2195.5600); Tue, 17 Dec 2002 13:04:43 -0800
>Received: from LSV (209.115.31.36) by mercury.acers (Worldmail 1.3.167); 17
>Dec 2002 16:04:15 -0500
>Received: from LSV.CERAMICS.ORG by LSV.CERAMICS.ORG (LISTSERV-TCP/IP
>release 1.8d) with spool id 248917 for CLAYART@LSV.CERAMICS.ORG;
>Tue, 17 Dec 2002 16:03:33 -0500
>Received: from 209.115.31.35 by LSV.CERAMICS.ORG (SMTPL release 1.0d) with
>TCP; Tue, 17 Dec 2002 10:16:33 -0500
>Received: from LSV (209.115.31.36) by mercury.acers (Worldmail 1.3.167) for
> CLAYART@LSV.CERAMICS.ORG; 17 Dec 2002 10:17:14 -0500
>Approved-By: melpots2@PCLINK.COM
>Message-ID: <3DFE01B90000177E@mercury.acers> (added by mercury.acers)
>Sender: Clayart
>Return-Path: owner-clayart@LSV.CERAMICS.ORG
>X-OriginalArrivalTime: 17 Dec 2002 21:04:44.0179 (UTC)
>FILETIME=[EC77CE30:01C2A60F]
>
>L.P. Skeen,
>
>I would start with earplugs.
>
>Seriously, you could try belt dressing and lubricate the head bearings.
>But,in my limited experience, it is tough to completely eliminate. I am
>sure that there are better minds than mine who have done it though.
>
>Good luck,
>
>John
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
john horner on wed 18 dec 02
Message: 13
Date: Mon, 16 Dec 2002 23:35:20 -0500
From: "L. P. Skeen"
Subject: #@%&*!!! Brent Chirp
I have a Brent CXC on loan from a friend and it has
started that nasty
chirping for which Brents are most famous. :( Is
there any way to
stop it?
Change the brushes. That worked for my shimpo.
=====
Have a blessed day!
John <><
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
L. P. Skeen on wed 18 dec 02
Thanks for all answers on this question. Will have to check into these
brush things.
L
----- Original Message -----
From: "john horner"
Subject: Re: #@%&*!!! Brent Chirp
> Change the brushes. That worked for my shimpo.
| |
|
