Susan Fox-Hirschmann on thu 30 jan 03
I would like some feedback on Bartlett controllers.....good/or bad, please
as I am considering getting a new kiln with one (8 segment controller).
Thanks!
Susan
Annandale, VA
Bob Santerre on sat 1 feb 03
Hi Susan,
I have a Bartlett controller (3 segments) on my Bailey electric kiln (2
years old).
Controller has worked flawlessly. Initially had some problems
understanding the manual and codes being displayed on the LED screen.
Jim Bailey gave me Dave Bartlertt's phone number. I spoke directly
with Dave, cleared up my mis-understandings and all has been well since.
Bob
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Susan Fox-Hirschmann wrote:
>I would like some feedback on Bartlett controllers.....good/or bad,
please
>as I am considering getting a new kiln with one (8 segment controller).
>Thanks!
>Susan
>Annandale, VA
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
>
Kim McCarthy on mon 7 jun 04
I am thinking of replacing the controller on my kiln with a Bartlett
Controller. I have a 12 cubic foot electric kiln, with three pyrometers and fire to
cone 6. I would appreciate hearing any positive and negative feedback from
those who have experience with this brand of controller.
Thanks,
Kim McCarthy
kmc5140@aol.com
Lester Haworth on tue 8 jun 04
What type of controller is on the kiln at present? Have you contacted the
company who manufactured the kiln to find out if this modification is
recommended?
Les H.
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG]On Behalf Of Kim McCarthy
Sent: Monday, June 07, 2004 11:56 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Bartlett Controller
I am thinking of replacing the controller on my kiln with a Bartlett
Controller. I have a 12 cubic foot electric kiln, with three pyrometers and
fire to
cone 6. I would appreciate hearing any positive and negative feedback from
those who have experience with this brand of controller.
Thanks,
Kim McCarthy
kmc5140@aol.com
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
WHC228@AOL.COM on tue 8 jun 04
Kim
I have five electric kilns with Bartlett controllers.
I am more than satisfied with the controllers and the company that produces
them.
I have had them for a long time, and use them every day to fire to cone ten.
These kilns are firing crystalline glazes www.flambeauxartpottery.com , and
need to be precise. They are.
I have never used any other kind of controller on an electric kiln, so I
cannot compare them to other brands.
Since almost all of the kiln companies use them, I would guess that there is
a good reason that they do.
Bill Campbell
Bob Santerre on wed 9 jun 04
Kim, I've used one then two Bartlett controllers for more than 3 yrs. I
have no experience with other controllers, but can tell you that these
controllers have worked flawlessly on my kilns for these 3 yrs.
Initially I had some problems understanding the manual and called Dave
Bartlertt directly. He was very patient, answered all my questions,
offered helpful suggestions about how to offset the different zone
temperature probes to balance the kiln, etc. Haven't had a problem since.
P.S. I have no financial interest in Bartlett controllers.
Bob
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Kim McCarthy wrote:
>I am thinking of replacing the controller on my kiln with a Bartlett
>Controller. I have a 12 cubic foot electric kiln, with three pyrometers and fire to
>cone 6. I would appreciate hearing any positive and negative feedback from
>those who have experience with this brand of controller.
>
>Thanks,
>Kim McCarthy
>kmc5140@aol.com
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
>
>
>
| |
|
