george koller on mon 7 apr 03
Just a fast note....
The nozzle diameter for the harbor Freight #44677
HVLP spray gun is 0.70 Inch. This will allow some
pretty big stuff to pass that would otherwise clog the
nozzles of compressor based guns. I think good for
versatility.
Of course you may want to sieve for the final product
but the gun should "handle" most anything we would
normally want in a glaze.
Best,
George
Barbara Mueller on mon 7 apr 03
3/4 of an inch hum..maybe a decimal misplacement?
Barb
----- Original Message -----
From: "george koller"
To:
Sent: Monday, April 07, 2003 11:39 AM
Subject: HVLP Sprayer Note
> Just a fast note....
>
> The nozzle diameter for the harbor Freight #44677
> HVLP spray gun is 0.70 Inch. This will allow some
> pretty big stuff to pass that would otherwise clog the
> nozzles of compressor based guns. I think good for
> versatility.
>
> Of course you may want to sieve for the final product
> but the gun should "handle" most anything we would
> normally want in a glaze.
>
> Best,
>
>
> George
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|
