Tony Ferguson on thu 22 may 03
I was looking at this thinking I might beable to wire it into my skutt =
1027 I just purchased. Would anyone with kiln temp controllers consider =
taking a look and letting me know if it will work?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3D2531836847&category=3D=
42897
Thank you.
Tony Ferguson
On Lake Superior, where the sky meets the Lake
Stoneware, Porcelain, Raku and more
by Coleman, Ferguson, Winchester...
www.aquariusartgallery.com
218-727-6339
315 N. Lake Ave
Apt 312
Duluth, MN 55806
Rick Hamelin on fri 23 may 03
Fundamently, it would be a backup to your Kilnsitter. This would not regulate
your independently switched zones. YOu would still have to measure and adjust
them. This is a single zone reading instrument, like the Kilnsitter, that
would shut off, I assume, at a temperature setting you set at slightly higher
than the Kilnsitter. Thermocouple alone is worth the price.
> I was looking at this thinking I might beable to wire it into my skutt 1027 I
> just purchased. Would anyone with kiln temp controllers consider taking a look
> and letting me know if it will work?
>
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2531836847&category=42897
>
>
> Thank you.
>
> Tony Ferguson
> On Lake Superior, where the sky meets the Lake
>
> Stoneware, Porcelain, Raku and more
> by Coleman, Ferguson, Winchester...
> www.aquariusartgallery.com
> 218-727-6339
> 315 N. Lake Ave
> Apt 312
> Duluth, MN 55806
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
| |
|
