clifton wood on tue 24 jun 03
hi, all.
i'm getting ready to test a bunch of glazes, including some from Michael Bailey's
Glazes Cone 6 book.
For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls for 47%
"high alkaline frit".
well, i'm a glaze dummy.
and my first guesses would be ferro 3124 or ferro 3134... because i THINK they're the
only alkaline frits in our glaze cupboard suitable for mid range.
so - what do you think?
any advice will be most welcome.
thanks.
Robert Huskey on tue 24 jun 03
In the appendex, Bailey lists Ferro frit 3110 as being a "high alkaline
frit" He terms Ferro 3134 as a "standard borax frit" .
Bob Huskey - Tallahassee, Florida, USA
Original Message -----
From: "clifton wood"
To:
Sent: Tuesday, June 24, 2003 2:17 PM
Subject: frit for Bailey's HA1 high alkaline glaze
> hi, all.
>
> i'm getting ready to test a bunch of glazes, including some from Michael
Bailey's
> Glazes Cone 6 book.
>
> For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls
for 47%
> "high alkaline frit".
claybair on wed 25 jun 03
Clifton,
Be sure to get all the errata before you mix any glazes from that book.
Apparently there are a lot of corrections. Contact Lark publishing.
Gayle Bair
Bainbridge Island, WA
http://claybair.com
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG]On Behalf Of clifton wood
Sent: Tuesday, June 24, 2003 11:18 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: frit for Bailey's HA1 high alkaline glaze
hi, all.
i'm getting ready to test a bunch of glazes, including some from Michael
Bailey's
Glazes Cone 6 book.
For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls
for 47%
"high alkaline frit".
well, i'm a glaze dummy.
and my first guesses would be ferro 3124 or ferro 3134... because i THINK
they're the
only alkaline frits in our glaze cupboard suitable for mid range.
so - what do you think?
any advice will be most welcome.
thanks.
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Charles Moore on wed 25 jun 03
Hi, Gayle (and Clifton),
Mark Burleson's "The Ceramic Glaze Handbook," published by Lark, is out in a
corrected edition. (I still find problems, as Lark is now reporting.)
Michael Bailey's "Glazes for Cone 6," was published by A & C Black of
London.
I tried to reach Clifton off-list to suggest the he consider using Ron Roy
and John Hesselberth's "Mastering Cone 6 Glazes" (see
www.frogpondpottery.com). However, the message was returned to me as
having an invalid email address.
Bailey's book is a good one, but he pushes the boundaries, rather than
working toward stability as in Ron and John's book. I guess if I were to
recommend one single glaze book to a ^6 potter, it would be Ron and John's.
If I could recommend a second book, it would indeed be Bailey's.
Hope this email does not have a rude tone. None was intended.
Charles Moore
Sacramento
----- Original Message -----
From: "claybair"
To:
Sent: Wednesday, June 25, 2003 1:50 AM
Subject: Re: frit for Bailey's HA1 high alkaline glaze
> Clifton,
>
> Be sure to get all the errata before you mix any glazes from that book.
> Apparently there are a lot of corrections. Contact Lark publishing.
>
> Gayle Bair
> Bainbridge Island, WA
> http://claybair.com
>
> -----Original Message-----
> From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG]On Behalf Of clifton wood
> Sent: Tuesday, June 24, 2003 11:18 AM
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: frit for Bailey's HA1 high alkaline glaze
>
>
> hi, all.
>
> i'm getting ready to test a bunch of glazes, including some from Michael
> Bailey's
> Glazes Cone 6 book.
>
> For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls
> for 47%
> "high alkaline frit".
>
> well, i'm a glaze dummy.
>
> and my first guesses would be ferro 3124 or ferro 3134... because i THINK
> they're the
> only alkaline frits in our glaze cupboard suitable for mid range.
>
> so - what do you think?
>
> any advice will be most welcome.
>
> thanks.
>
>
____________________________________________________________________________
> __
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
Rick Hamelin on wed 25 jun 03
3195 is used by a manufacturer/supplier I know for their cone 6 glazes.
It is not a clear frit at the low range
Try Fusion frit. they have a web site, you can buy from them and they don't
keep secrets. www.fusionceramics.com
Good luck
Rick
> Clifton,
>
> Be sure to get all the errata before you mix any glazes from that book.
> Apparently there are a lot of corrections. Contact Lark publishing.
>
> Gayle Bair
> Bainbridge Island, WA
> http://claybair.com
>
> -----Original Message-----
> From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG]On Behalf Of clifton wood
> Sent: Tuesday, June 24, 2003 11:18 AM
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: frit for Bailey's HA1 high alkaline glaze
>
>
> hi, all.
>
> i'm getting ready to test a bunch of glazes, including some from Michael
> Bailey's
> Glazes Cone 6 book.
>
> For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls
> for 47%
> "high alkaline frit".
>
> well, i'm a glaze dummy.
>
> and my first guesses would be ferro 3124 or ferro 3134... because i THINK
> they're the
> only alkaline frits in our glaze cupboard suitable for mid range.
>
> so - what do you think?
>
> any advice will be most welcome.
>
> thanks.
>
> ____________________________________________________________________________
> __
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Roger Korn on sun 29 jun 03
Hi Steve,
The jpg of the table is corrupted - it doesn't display correctly on
either Netscape or Internet Explorer.
Could you reload it to the bathpotters site?
Thanks,
Roger
Steve Mills wrote:
>In the Bath Potters Website is an analysis sheet for the Frits we sell.
>
>
>
--
Roger Korn
McKay Creek Ceramics
In AZ: PO Box 463
4215 Culpepper Ranch Rd
Rimrock, AZ 86335
928-567-5699 <-
In OR: PO Box 436
31330 NW Pacific Ave.
North Plains, OR 97133
503-647-5464
Steve Mills on sun 29 jun 03
I am sure that must be a *typo*; F3110 is a High Soda Frit.
Steve
Bath
UK
In message , Robert Huskey writes
>In the appendex, Bailey lists Ferro frit 3110 as being a "high alkaline
>frit" He terms Ferro 3134 as a "standard borax frit" .
>
>
>Bob Huskey - Tallahassee, Florida, USA
>
>Original Message -----
>From: "clifton wood"
>To:
>Sent: Tuesday, June 24, 2003 2:17 PM
>Subject: frit for Bailey's HA1 high alkaline glaze
>
>
>> hi, all.
>>
>> i'm getting ready to test a bunch of glazes, including some from Michael
>Bailey's
>> Glazes Cone 6 book.
>>
>> For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls
>for 47%
>> "high alkaline frit".
--
Steve Mills
Bath
UK
Steve Mills on sun 29 jun 03
In the Bath Potters Website is an analysis sheet for the Frits we sell.
High Alkaline (T) Frit is there. You could do a comparison with other
(Ferro?) Frits and use the nearest.
Steve
Bath
UK
In message , clifton wood writes
>hi, all.
>
>i'm getting ready to test a bunch of glazes, including some from Michael
>Bailey's
>Glazes Cone 6 book.
>
>For the recipe for his HA1 high alkaline glaze (p 56 in my copy), he calls for
>47%
>"high alkaline frit".
>
>well, i'm a glaze dummy.
>
>and my first guesses would be ferro 3124 or ferro 3134... because i THINK
>they're the
>only alkaline frits in our glaze cupboard suitable for mid range.
>
>so - what do you think?
>
>any advice will be most welcome.
>
>thanks.
--
Steve Mills
Bath
UK
Steve Mills on tue 1 jul 03
Thanks
Will do
Steve
In message , Roger Korn writes
>Hi Steve,
>
>The jpg of the table is corrupted - it doesn't display correctly on
>either Netscape or Internet Explorer.
>Could you reload it to the bathpotters site?
>
>Thanks,
>Roger
>
>Steve Mills wrote:
>
>>In the Bath Potters Website is an analysis sheet for the Frits we sell.
>>
>>
>>
>
>--
>Roger Korn
>McKay Creek Ceramics
>In AZ: PO Box 463
> 4215 Culpepper Ranch Rd
> Rimrock, AZ 86335
> 928-567-5699 <-
>In OR: PO Box 436
> 31330 NW Pacific Ave.
> North Plains, OR 97133
> 503-647-5464
--
Steve Mills
Bath
UK
| |
|
