Merle Davis on wed 10 sep 03
I've used Laguna, Aardvark, and Amaco majolica glazes and each of them give a
consistently reliable and beautiful result. I always soak for about 30
minutes. No problems. Merle Davis
Jerry Dean on wed 10 sep 03
After years of trying to address the pin holing problem on the OUTSIDE of
my bowls, Im giving up. Flat pieces, low plates etc .. all look
beautiful.....even inside the bowls are great.......but no mater how slow I bisque ^03 , or
glaze fire ^05, or how smooth the outside is( no "junk" exposed ) , My L.
Arbuckle glaze recipe...still pinholes...I have a shelf full of large thrown
Stans Red earthenware pots...that Im tired of ruining.. so can anyone suggest a
commercial glaze...that I can dip these big pots in and still use my mason
stains etc......Thanks JT
Malcolm Schosha on thu 11 sep 03
JT,
It is strange that the pin holing is on the outside only. Are you
SURE it is not a glaze application problem?
Malcolm
..............................................
--- In clayart@yahoogroups.com, Jerry Dean wrote:
> After years of trying to address the pin holing problem on the
OUTSIDE of
> my bowls, Im giving up. Flat pieces, low plates etc .. all look
> beautiful.....even inside the bowls are great.......but no mater
how slow I bisque ^03 , or
> glaze fire ^05, or how smooth the outside is( no "junk"
exposed ) , My L.
> Arbuckle glaze recipe...still pinholes...I have a shelf full of
large thrown
> Stans Red earthenware pots...that Im tired of ruining.. so can
anyone suggest a
> commercial glaze...that I can dip these big pots in and still use
my mason
> stains etc......Thanks JT
>
>
______________________________________________________________________
________
> Send postings to clayart@l...
>
> You may look at the archives for the list or change your
subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@p...
| |
|
