stephen h on wed 28 jan 04
i would deeply appreciate any and all leads, comments, suggestion ,do and don't ,from all you veterans. been working with clay for about 8 years and can consistently throw 25lbs, i'm 25 yrs old. i'm confident with my ability and knowledge. i'm very fortunate to have been able to save enough money that i can purchase all new equipment. i know the direction that i want to take : business and artistic. i would deeply appreciate info on kilns, wheels , books,deals on new/ used equipment and just stuff.
the thoughts that i'm pondering now are
1 geil or bailey or olson, other,, i want to go with about a 24 cu foot ( stacking space) gas
2 brentcxc, or those new axner wheels, or shimpo velocity
3 skutt ( with computer) , or viking, or LandL: i want about 10 cubic, must reach cone ten
anyway i would appreciate any info
peace to all
steve
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
Sue Clayton on thu 29 jan 04
Hi Stephen,
I set up my new space this past fall. I got most of my stuff (wheel and
kiln) from Bailey, and have been very happy with both the equipment and the
advice when I call with a question. Good luck and enjoy.
-- Sue
----- Original Message -----
From: stephen h
To:
Sent: Wednesday, January 28, 2004 12:31 PM
Subject: going to set up a studio , finally
> i would deeply appreciate any and all leads, comments, suggestion ,do and
don't ,from all you veterans. been working with clay for about 8 years and
can consistently throw 25lbs, i'm 25 yrs old. i'm confident with my ability
and knowledge. i'm very fortunate to have been able to save enough money
that i can purchase all new equipment. i know the direction that i want to
take : business and artistic. i would deeply appreciate info on kilns,
wheels , books,deals on new/ used equipment and just stuff.
> the thoughts that i'm pondering now are
>
> 1 geil or bailey or olson, other,, i want to go with about a 24 cu foot
stacking space) gas
>
> 2 brentcxc, or those new axner wheels, or shimpo velocity
>
> 3 skutt ( with computer) , or viking, or LandL: i want about 10 cubic,
must reach cone ten
>
> anyway i would appreciate any info
>
> peace to all
> steve
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free web site building tool. Try it!
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|
