Joanne Fuller on wed 4 feb 04
My husband bought a thermocouple for me from Stan Pawlak on Ebay, but I cannot figure out how to wire it. I tried emailing Stan, but could not understand how to use the unit he shipped me. He spoke in electricians terms. It's greek to me.
On the front of my unit it says "XTMD-3011". I also have a probe. And an "AC Contactor"
Does anyone else have this unit? If so, could you explain, in plain english, how to assemble and use the thermocouple. I feel so stupid.
Please help.
Thanks,
Joanne Fuller
---------------------------------
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online
LindaBlossom on thu 5 feb 04
Joanne,
I have this unit. There are two terminals on the back of the meter. Use a
piece of thermostat wire and put one of the copper wires to one of those
terminals (screws) and the other copper wire to the other screw. Then go to
the thermocouple and do the same thing. If it doesn't work, reverse the
wires on the thermocouple.
Linda
----- Original Message -----
From: "Joanne Fuller"
To:
Sent: Wednesday, February 04, 2004 9:26 PM
Subject: Need help with thermocouple
> My husband bought a thermocouple for me from Stan Pawlak on Ebay, but I
cannot figure out how to wire it. I tried emailing Stan, but could not
understand how to use the unit he shipped me. He spoke in electricians
terms. It's greek to me.
>
> On the front of my unit it says "XTMD-3011". I also have a probe. And an
"AC Contactor"
>
> Does anyone else have this unit? If so, could you explain, in plain
english, how to assemble and use the thermocouple. I feel so stupid.
> Please help.
>
> Thanks,
> Joanne Fuller
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Finance: Get your refund fast by filing online
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
Arnold Howard on thu 5 feb 04
Joanne, remove the two wires from the old thermocouple and attach them to
the new one. Don't worry if you attach the wires to the wrong screws. If you
make a mistake, the temperature will go down instead of up. In that case,
reverse the wires.
Sincerely,
Arnold Howard
Paragon Industries, L.P.
arnoldhoward@att.net
From: "Joanne Fuller"
> My husband bought a thermocouple for me from Stan Pawlak on Ebay, but I
cannot figure out how to wire it. > Joanne Fuller
.com.
| |
|
