John on sun 14 mar 04
Morning,
Shopping for a test kiln that will reach a true ^10.
Can that temp. range be achieved with 110V?
Very good reliability would be a plus.
=20
John
Rob Van Rens on sun 14 mar 04
John,
L&L sells a 110V Baby-doll kiln that reaches cone 10 fairly easily and works
nicely as a test kiln.
Rob Van Rens
Frederick Clay Art Center
5400 Yukon Ct, Unit 500
Frederick, MD 21758
(301) 371-0310
www.frederickclayartcenter.com
Fredrick Paget on sun 14 mar 04
>Morning,
>Shopping for a test kiln that will reach a true ^10.
>
>Can that temp. range be achieved with 110V?
>
>Very good reliability would be a plus.
>
>John
No Problem with my little Aim 88. It runs on 120 volts not 110 and I
have it plugged into my Bailey on the wall controller. I have
installed a 20 amp fused 120 volt socket on the Bailey and the kiln
is plugged into that. It hits cone 10 regularly. With this setup I
can do controlled cooling just the same as the big kiln. I need new
elements every so often, Kiln and elements have the full ITC
treatment.
Fred
--
From Fred Paget, Marin County, California, USA
fredrick@well.com
Cindi Anderson on sun 14 mar 04
Hi
Here are some popular test kilns.
http://www.bigceramicstore.com/Supplies/kilns/test-kilns.htm
Cindi
BigCeramicStore.com
----- Original Message -----
From: "John"
To:
Sent: Sunday, March 14, 2004 6:12 AM
Subject: Test kilns @^10
Morning,
Shopping for a test kiln that will reach a true ^10.
Can that temp. range be achieved with 110V?
Very good reliability would be a plus.
John
Arnold Howard on mon 15 mar 04
Yes, you can buy a true cone 10 kiln that fires on 120 volts. If it is small
enough, it will reach cone 10.
Sincerely,
Arnold Howard
Paragon Industries, L.P.
arnoldhoward@att.net
From: "John"
Shopping for a test kiln that will reach a true ^10.
Can that temp. range be achieved with 110V?
.com.
| |
|
