search  current discussion  categories  glazes - cone 04-06 

sun, 28 nov 2004 08:35:31 -0600from: carleen lord

updated tue 30 nov 04


Vince Pitelka on mon 29 nov 04

Subject: melt down

----- Original Message -----
From: "Rogier Donker"
Sent: Monday, November 29, 2004 8:04 AM
Subject: Date: Sun, 28 Nov 2004 08:35:31 -0600From: Carleen lord
Subject: melt down

> Carleen..:-)
> Remove all lava and hope that you can do so without demolishing the brick
> and elements.....easier said than done, especially in a hobby kiln. Costly
> too....if the melt down is really, really bad you may have to purchase a
> new
> kiln. As to cause? A bunch of possibilities: Kilnsitter out of adjustment,
> blow up in the kiln that obstructed the KSTA, etc. etc. Hit my web site
> under Kiln repair....
> you might find some answers there. You can
> always E mail me and I'll help you out if I can.
> Rogier Donker
> ______________________________________________________________________________
> Send postings to
> You may look at the archives for the list or change your subscription
> settings from
> Moderator of the list is Mel Jacobson who may be reached at