search  current discussion  categories  kilns & firing - shelves & furniture 

galvanized garbage can saggar??

updated sat 8 jan 05

 

EASLEY on thu 6 jan 05


Does anyone remember anything about using a small galvanized garbage can =
as a saggar in an electric kiln?
I think there was an article about this years ago on CM, but I can't =
locate it........
As I recall, you needed to fire the can first to remove the lacquer or =
whatever, then use it as a saggar, sealing the lid with a coil of clay.
I this sounds familiar, please respond.......
Thanks in advance,
Pam in Seattle, where snow is threatened and I'm just awaitin' for it!

Russel Fouts on fri 7 jan 05


Pam,

>> Does anyone remember anything about using a small galvanized garbage
can as a saggar in an electric kiln? I think there was an article about
this years ago on CM, but I can't locate it........ As I recall, you needed
to fire the can first to remove the lacquer or whatever, then use it as a
saggar, sealing the lid with a coil of clay. I this sounds familiar, please
respond....... <<

A coil of clay will not do it. It will dry and open up. If you want to
really seal it, you will need something like kaowool or some other kind of
fiber.

Is your kiln vented (and it should be)? or if you're in a separate building
can you leave windows open and then vacate. Depending on how much
combustible you're going to use, you will get some or more smoke leaking
out, even with fiber. And depending on what you've got in the sagger, it
will be more or less poisonous.

You need to protect your lungs some.

It's a good direction to experiment but make sure you're protected.

Russel



Russel Fouts
Mes Potes & Mes Pots
Brussels, Belgium
Tel: +32 2 223 02 75
Mobile: +32 476 55 38 75

Http://www.mypots.com
Home of "The Potters Portal"
Over 3000 Pottery Related Links!
Updated frequently

My work can also be seen on:
The World Crafts Council Belgium Site http://wcc-bf.org:
Members English Pages: http://wcc-bf.org/artistes/ukrussel_fouts.htm
EasyCraft: http://www.easycraft.org

"To announce that there must be no criticism of the president, or that
we are to stand by the president, right or wrong, is not only
unpatriotic and servile, but is morally treasonable to the American
public." --U.S. President (and Nobel Peace Prize winner) Theodore
Roosevelt.