Judy Rohrbaugh on wed 30 mar 05
I am lefthanded but throw mostly like I am right handed with a few of my own
odd techniques. I sometimes find myself timming a bit on the inside of some
of my larger bowls. I am assuming it's because I put more pressure on the
inside as I am throwing, leaving throw marks that I sometimes don't want.
Antionette, any chance you are also lefthanded?
Judy Rohrbaugh
Ohio
_fineartstoneware@aol.com_ (mailto:fineartstoneware@aol.com)
Antoinette Badenhorst on wed 30 mar 05
No Judy, but while you mention this; I had a person that has previous
training on the wheel in my studio so that she could shape up her =
skills.
She was struggling to throw right handed and after I observed her =
carefully,
I got the idea that she should throw left handed. She tried that and
immediately improved about 100%. Funny enough, when she trims, she needs =
to
switch back to right hand trimming. It was during assistance to her that =
the
inside trimming and throwing from the inside came to mind.
Antoinette Badenhorst
105 Westwood Circle
Saltillo MS, 38866
www.clayandcanvas.com
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Judy =
Rohrbaugh
Sent: Wednesday, March 30, 2005 7:42 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: trimming the inside of a bowl- and being lefthanded
I am lefthanded but throw mostly like I am right handed with a few of =
my
own
odd techniques. I sometimes find myself timming a bit on the inside of =
some
of my larger bowls. I am assuming it's because I put more pressure on =
the
inside as I am throwing, leaving throw marks that I sometimes don't =
want.
Antionette, any chance you are also lefthanded?
Judy Rohrbaugh
Ohio
_fineartstoneware@aol.com_ (mailto:fineartstoneware@aol.com)
_________________________________________________________________________=
___
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|