Kathy McDonald on thu 5 may 05
Question was:
Does anyone have a good source for a 10x10 free standing canopy type
four wall tent to use for outdoor shows?
Canadian Tire have a free standing gazebo that is perfect for outdoor craft
shows.
it's easy to set up. and folds up to fit in a small case for ease of
packing.
The website is:
http://www.canadiantire.ca
Product# 76-5141-4
If it's windy I use 2 litre bottles weighted with sand
suspended to the corners to the corners and it won't blow over.
((Lot's of wind here on the priaries.)
Kathy
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.3 - Release Date: 5/3/2005
Brenda Funk on mon 9 may 05
Sam's Club has the "Easy-Up" for $170. It's very sturdy, and one person can
put it up and take down. (Of course, it's easier with two, and someone
always offers a hand). For weights, I have sections of 4"PVC pipe capped,
filled with concrete, with an eye bolt through one of the end caps. This
attaches to the corner posts with ratcheting tie-downs (also from Sam's
Club).
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Kathy McDonald
Sent: Thursday, May 05, 2005 7:53 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Re: Source for 10 x 10 free standing canopy
Question was:
Does anyone have a good source for a 10x10 free standing canopy type four
wall tent to use for outdoor shows?
Canadian Tire have a free standing gazebo that is perfect for outdoor craft
shows.
it's easy to set up. and folds up to fit in a small case for ease of
packing.
The website is:
http://www.canadiantire.ca
Product# 76-5141-4
If it's windy I use 2 litre bottles weighted with sand suspended to the
corners to the corners and it won't blow over.
((Lot's of wind here on the priaries.)
Kathy
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.3 - Release Date: 5/3/2005
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|