Carole Fox on wed 8 jun 05
Does anybody have any experience with taking this underglaze to cone 6?
Yeah, I know it's meant for low-fire, but I'm hoping...
Carole Fox
Silver Fox Pottery
Elkton, MD
thesilverfox@dol.net
Suzanne Wolfe on wed 8 jun 05
Hi Carole,
CC165 works fine at higher temperatures, except that it becomes more
brown the higher you go. At cone 9 it is more of a brown-black that
the original black.
Suzanne Wolfe
----- Original Message -----
From: Carole Fox
Date: Wednesday, June 8, 2005 3:58 am
Subject: Duncan CC165
> Does anybody have any experience with taking this underglaze to
> cone 6?
> Yeah, I know it's meant for low-fire, but I'm hoping...
> Carole Fox
> Silver Fox Pottery
> Elkton, MD
> thesilverfox@dol.net
>
>
________________________________________________________________________
______
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
Snail Scott on wed 8 jun 05
At 09:58 AM 6/8/2005 -0400, you wrote:
>Does anybody have any experience with taking this underglaze to cone 6?
>Yeah, I know it's meant for low-fire, but I'm hoping...
Duncan used to print a flyer with a
description of all their products when
fired to ^6. I had one, years ago, from
a local distributor - very handy.
I'm not sure what color CC-165 is, but
generally speaking, everything but the
bright reds, purples and 'neon' yellow
and green does pretty well at ^6 in
oxidation. Purples often turn blue,
and reds get 'bleached'. Reduction
affected some of the greens (presumably
copper-based), and tended to kill the
redder colors. The choice of covering glaze
(if any) has a big effect, too, on what
each color will look like - far more
effect than the choice of glaze at lower
temperatures.
-Snail
Michael Wendt on wed 8 jun 05
This is one of those... just try it type things. I wondered if the new
concepts colors would go to cone 10 so we did a full pallet of all we could
get our hands on. Guess what, the red goes clear to cone 10 and is quite
red. If anyone wants to see a photo, I can post it on my web site.
In general, the best way to answer this kind of question is to try it with
your materials and firing process.
Regards,
Michael Wendt
Wendt Pottery
2729 Clearwater Ave
Lewiston, Idaho 83501
USA
wendtpot@lewiston.com
www.wendtpottery.com
At 09:58 AM 6/8/2005 -0400, you wrote:
>Does anybody have any experience with taking this underglaze to cone 6?
>Yeah, I know it's meant for low-fire, but I'm hoping...
Mark Pitney on wed 8 jun 05
Hi Carole,
If I am not mistaken cc165 is the black? Yes, it can go to cone 6 no problem
Mark and Cindy
The Mudpit
228 Manhattan Ave.
Brooklyn,NY. 11206
_www.mudpitnyc.com_ (http://www.mudpitnyc.com/)
718-218-9424
mudpitnyc@aol.com
Carole Fox on wed 8 jun 05
Sorry for not being more specific... the color is black. I am planning to
use it under a cone 6 celadon glaze.
I would be happy if it turned brown.
And I am an idiot for taking a commissioned job for something I've never
done before and having to do it in less than two weeks. It's for the public
school system and I'm a sucker. I guess I should keep my fingers crossed,
but it gets really hard to get any work done like that!
Carole Fox
Silver Fox Pottery
Elkton, MD
thesilverfox@dol.net
| |
|
