Paul Lewing on thu 20 oct 05
on 10/20/05 3:36 AM, Brenda G. Anderson at bganderson@MCHSI.COM wrote:
> One-Some of my glazes are extremely =
> runny and therefore drip on the shelves of my Skutt. Can I add =
> something to the mixture to keep them from being so runny?
Brenda, if they're that runny, you may be using glazes designed for a lower
temperature. But to adapt the ones you have there, you need to add more
refractory stuff. If I were you, I'd do a series of tests, adding in
increments of 5% clay of some kind, either kaolin or (if it's a dark glaze)
ball clay. However if it's really that runny, you may find that if you add
enough clay to stop the running, you'll have a completely different-looking
glaze.
>
> Two- Because the glaze has dripped on my shelves, does anyone have a =
> great way to repair them?
Arnold's suggestion of the chisel is good. Then give it a good grinding on
your bench grinder to get rid of any traces of glaze. And put some kiln
wash or silica powder over the spot next time you fire.
Paul Lewing, Seattle
Brenda G. Anderson on thu 20 oct 05
I need help. I have been doing low fire pottery for several years using =
commercially mixed glazes. I'm stepping out to mixing my own high fire =
glazes, have bought several books on the subject and all the chemicals. =
Several of my pieces turn out great; some have not. Ahh, the world of =
pottery.
Two questions from the experts: One-Some of my glazes are extremely =
runny and therefore drip on the shelves of my Skutt. Can I add =
something to the mixture to keep them from being so runny? =20
Two- Because the glaze has dripped on my shelves, does anyone have a =
great way to repair them? =20
Any additional tips on mixing glazes would be helpful. Otherwise, I'll =
keep reading the books and experimenting. Guess I need to do that =
anyway.
Daughter of Clay Pottery
Brenda G. Anderson
Spanish Fort, Alabama
Arnold Howard on thu 20 oct 05
From: "Brenda G. Anderson"
Because the glaze has dripped on my shelves, does anyone have a great way to
repair them?
----------------
Wearing safety glasses, hold an old chisel at a sharp angle against the
shelf. Gently tap the chisel with a hammer to remove the melted glaze.
Sincerely,
Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / www.paragonweb.com
Victoria E. Hamilton on fri 21 oct 05
Hi Brenda -
One - see Paul Lewing's reply to this question.
Two - Please use kiln wash on your precious shelves (they're expensive,
yes?) that way any drips should come off either with the pot, or they'd be
relatively easy to get off (Arnold Howard's reply) without damaging the
shelves too badly.
Kiln Wash: equal parts Alumina, EPK and Silica.
Re the recipe above: there are many effective variations of this recipe.
Buona fortuna,
Vicki Hamilton
Millennia Antica Pottery
Seattle, WA - 71 degrees F today and sunny. Tomatoes are doing pretty good!
So what're ya gonna do? It's the pacific northwest - no telling!
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Brenda G.
Anderson
Sent: Thursday, October 20, 2005 03:36
To: CLAYART@LSV.CERAMICS.ORG
Subject: new at glazing
I need help. I have been doing low fire pottery for several years using
commercially mixed glazes. I'm stepping out to mixing my own high fire
glazes, have bought several books on the subject and all the chemicals.
Several of my pieces turn out great; some have not. Ahh, the world of
pottery.
Two questions from the experts: One-Some of my glazes are extremely runny
and therefore drip on the shelves of my Skutt. Can I add something to the
mixture to keep them from being so runny?
Two- Because the glaze has dripped on my shelves, does anyone have a great
way to repair them?
Any additional tips on mixing glazes would be helpful. Otherwise, I'll keep
reading the books and experimenting. Guess I need to do that anyway.
Daughter of Clay Pottery
Brenda G. Anderson
Spanish Fort, Alabama
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|