Barbara Mcavoy on mon 9 jan 06
Hello,
I have had a customer request for a ceramic/porcelain shower stale basin
to be made. Would anyone have any info as to where i could refer the
customer to?
L. P. Skeen on mon 9 jan 06
Yep, Stephani Stevenson. She's on this list, but I don't remember her email
address.
L
----- Original Message -----
From: "Barbara Mcavoy"
To:
Sent: Monday, January 09, 2006 1:38 PM
Subject: Shower Stall Basin
> Hello,
> I have had a customer request for a ceramic/porcelain shower stale basin
> to be made. Would anyone have any info as to where i could refer the
> customer to?
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
Eleanora Eden on wed 11 jan 06
These days the waterproof barrier under the tiling for a shower stall
floor is a high-tech skin. When we did it 18 years ago we had to
have a copper pan fabricated and the pan was set in a sea of masonry.
So if somebody tells you you have to go the copper pan route, get
up-dated information.
Eleanora
>Hello,
>I have had a customer request for a ceramic/porcelain shower stale basin
>to be made. Would anyone have any info as to where i could refer the
>customer to?
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
Tom at Hutchtel.net on thu 12 jan 06
You can get a lot of information on tile, tile setting and shower pans by
going to www.taunton.com click into the Fine Homebuilding archives and
search away. The have run many articles on this, heated floors, plumbing,
sinks and much more. A good library should have access to the issues if you
need them.
Tom Wirt
Hutchinson, MN
twirt@hutchtel.net
www.claycoyote.com
Subject: Re: Shower Stall Basin
> These days the waterproof barrier under the tiling for a shower stall
> floor is a high-tech skin. When we did it 18 years ago we had to
> have a copper pan fabricated and the pan was set in a sea of masonry.
> So if somebody tells you you have to go the copper pan route, get
| |
|
