Laura Whittle on mon 10 apr 06
Hello All
I have just discovered this site and have already learned a lot from the
wealth of information on this board!
I was wondering if you all would be willing to share your favourite ^10
reduction glazes. I am a member of a guild with studio space and shared
glazes and we need to expand our ^10 colours. We are having a hard time
finding good stable recipes. We do have a varity of blues that work well
and would now like to try some new colours!
Thanks in advance!
Laura
Tom at Hutchtel.net on sun 29 apr 07
I've got to go with Mel here....mix your own glazes. Very simple, don't
have to use an expensive scale....and you know what is in your glazes. If
you don't know and want to adjust them, how are you going to do it. What
are you going to do if one crazes? Or is too runny. You don't have to
get into calculation unless you want to, and as Mel stated, premixed glazes
are considerably more expensive.
Now, if we could just find out what's in premixed clays....oops. Sorry.
Tom Wirt
Hutchinson, MN
twirt@hutchtel.net
www.claycoyote.com
Teresa Olson on sun 29 apr 07
Greetings unto the Wise and Venerable Clayart List!
I have agreed to teach an adult continuing ed class in clay at the local
college. The class has not been offered in a number of years. There is
equipment available, but no clay or glaze materials. I have about $100 to
$150 to purchase glazes. I have no experience with commercially prepared
glazes, but I think that is what I will have to use. I will be firing cone
10 reduction. Any suggestions?!
Please reply to me off list at Teresa597@aoldotcom
Thanks!
~ Teresa
Marcia Selsor on sun 29 apr 07
Ask people to bring wood ash to stretch your glazes.
There are lots of recipes. I agree with Mel. No bottles.
It is not a learning experience with premixed glazes.
Marcia Selsor
http://marciaselsor.com
Patty Kaliher on sun 29 apr 07
Not sure what you can get for $150. Tom Coleman has cone 10 reduction
glazes on the market. Sold in powder form. I know Georgies in Portland
carries them and other ceramics supply houses as well.
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Teresa Olson
Sent: Sunday, April 29, 2007 11:08 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: cone 10 glazes
Greetings unto the Wise and Venerable Clayart List!
I have agreed to teach an adult continuing ed class in clay at the local
college. The class has not been offered in a number of years. There is
equipment available, but no clay or glaze materials. I have about $100 to
$150 to purchase glazes. I have no experience with commercially prepared
glazes, but I think that is what I will have to use. I will be firing cone
10 reduction. Any suggestions?!
Please reply to me off list at Teresa597@aoldotcom
Thanks!
~ Teresa
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Lesley Anton on sun 29 apr 07
I have a friend - Ki Cho - at Echo Ceramics here in Los Angeles, that
sells cone 10 glazes thru his website -
www.echoceramics.com - he has pics on there too. He sells them wet
or dry for pretty reasonable prices.
He has some traditional glazes, shino, temoku, copper red...etc, and
some of his studio glazes, which are beautiful - all cone 10.
To see other shots of his glazes check out my website -
www.lesleyanton.com and go to the glazes/shades page. I have some
other names for some of them because my customers seemed to need more
basic descriptive names. But you'll be able to tell which is which
probably. If you have a question let me know.
Lesley Anton
On Apr 29, 2007, at 11:58 AM, Patty Kaliher wrote:
> Not sure what you can get for $150. Tom Coleman has cone 10 reduction
> glazes on the market. Sold in powder form. I know Georgies in
> Portland
> carries them and other ceramics supply houses as well.
>
> -----Original Message-----
> From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Teresa
> Olson
> Sent: Sunday, April 29, 2007 11:08 AM
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: cone 10 glazes
>
> Greetings unto the Wise and Venerable Clayart List!
>
> I have agreed to teach an adult continuing ed class in clay at the
> local
> college. The class has not been offered in a number of years.
> There is
> equipment available, but no clay or glaze materials. I have about
> $100 to
> $150 to purchase glazes. I have no experience with commercially
> prepared
> glazes, but I think that is what I will have to use. I will be
> firing cone
> 10 reduction. Any suggestions?!
>
> Please reply to me off list at Teresa597@aoldotcom
>
> Thanks!
> ~ Teresa
>
> ______________________________________________________________________
> ______
> __
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
> ______________________________________________________________________
> ________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
steve graber on sun 29 apr 07
don't forget you don't always have to glaze. maybe just using some stains might enable one base glaze to be used.
Aardvark has a white called Watt's White with i've used by itself, or throwing in a touch of various mason stains for some color.
and you might put together an ash glaze pretty quickly.
see ya
steve
Patty Kaliher wrote:
Not sure what you can get for $150. Tom Coleman has cone 10 reduction
glazes on the market. Sold in powder form. I know Georgies in Portland
carries them and other ceramics supply houses as well.
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Teresa Olson
Sent: Sunday, April 29, 2007 11:08 AM
To: CLAYART@LSV.CERAMICS.ORG
Subject: cone 10 glazes
Greetings unto the Wise and Venerable Clayart List!
I have agreed to teach an adult continuing ed class in clay at the local
college. The class has not been offered in a number of years. There is
equipment available, but no clay or glaze materials. I have about $100 to
$150 to purchase glazes. I have no experience with commercially prepared
glazes, but I think that is what I will have to use. I will be firing cone
10 reduction. Any suggestions?!
Please reply to me off list at Teresa597@aoldotcom
Thanks!
~ Teresa
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Steve Graber, Graber's Pottery, Inc
Claremont, California USA
The Steve Tool - for awesum texture on pots!
www.graberspottery.com steve@graberspottery.com
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
| |
|
