Robert Moore on fri 19 may 06
I have aquired an Alpine HF-10 kiln. Has anyone had this model and or have knowledge on the
control system? I searched the archives and found a request from 98' on the same model but only
the request. Lisa Skeen was the requester but I didn't see anyfollow up info.
Can anyone help me on this information?
Thanks,
Robert
Cindy Bracker on fri 19 may 06
Call David Sturm, my husband and Bracker's repair tech. He was
trained by Alpine years ago and knows more about the older models
than just about anyone else. He even served temporarily as Alpine's
official repair tech when they were "between employees" He should be
able to get you all the information you need. (And Lisa too, if it
still applies) You can reach him at the toll-free number below or by
e-mail to tech@brackers.com
Cindy Bracker Sturm
Bracker's Good Earth Clays, Inc.
888-822-1982
http://www.brackers.com
On May 19, 2006, at 8:47 AM, Robert Moore wrote:
> I have aquired an Alpine HF-10 kiln. Has anyone had this model and
> or have knowledge on the
> control system? I searched the archives and found a request from
> 98' on the same model but only
> the request. Lisa Skeen was the requester but I didn't see
> anyfollow up info.
> Can anyone help me on this information?
> Thanks,
> Robert
>
> ______________________________________________________________________
> ________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
Rikki Gill on fri 19 may 06
Hi Robert,
Try asking Alpine for the manual. I own an Alpine in my Guild studio, but
have never fired it. I fire at home.
I bought the manual for a tenent, but she is away right now.
Good luck, Rikki
----- Original Message -----
From: "Robert Moore"
To:
Sent: Friday, May 19, 2006 6:47 AM
Subject: seeking help on Kiln operation
>I have aquired an Alpine HF-10 kiln. Has anyone had this model and or have
>knowledge on the
> control system? I searched the archives and found a request from 98' on
> the same model but only
> the request. Lisa Skeen was the requester but I didn't see anyfollow up
> info.
> Can anyone help me on this information?
> Thanks,
> Robert
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
>
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.5.5/334 - Release Date: 5/8/2006
>
>
| |
|
