mel jacobson on fri 21 jul 06
i do not kiln wash advancers with anything.
itc would be a waste...and i do not paint anything
wet on advancers.
Clayart page link: http://www.visi.com/~melpots/clayart.html
Norman Aufrichtig on fri 21 jul 06
i kinda thought that, but knew from earlier posts that you use advancers,
thought i was missing something.
i will get some of that itc for the posts as the sticking is sometimes a
problem even though i coat the tops of the posts with a mixture of wax and
alumina, sounds like the itc will work a lot better.
thanks, norman a
----- Original Message -----
From: "mel jacobson"
Sent: Friday, July 21, 2006 9:13 PM
Subject: [CLAYART] advancers/wash
> i do not kiln wash advancers with anything.
> no need.
> itc would be a waste...and i do not paint anything
> wet on advancers.
> from: mel/minnetonka.mn.usa
> website: http://www.visi.com/~melpots/
> Clayart page link: http://www.visi.com/~melpots/clayart.html
> Send postings to firstname.lastname@example.org
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
> Moderator of the list is Mel Jacobson who may be reached at
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006