Beverlin's Rare on fri 22 sep 06
I have a complete studio set up and ready to go for
sale. All or part. Chemicals at 20% less than any
current published price. Some of the equipment
available is a pugmil, air release mold press, two
wheels, slab roller, and extruder. Please e-mail me
off clayart for details at rarearthpottery@yahoo.com.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Nancy Braches on sat 23 sep 06
Looks like she is in Burien, Washington....way too far from NY :(
Nancy
Helen Bates wrote: On Sat, 23 Sep 2006 09:10:50 -0700, Victoria Hamilton
wrote:
>Where are you located? This would be useful information.
To Vicki and others with the same or similar questions,
It would be much better if this Clayarter had mentioned location, name, and
so-on. However... googling the poster's username rarearthpottery results in
several relevant hits.
The second one points to Bill Amsterlaw's and my site for Clayarters' URLs
which includes two web addresses for this poster. The first url isn't
working right now, but the second, located at tripod.com is still available
as I write. You can browse through the site and get the information you're
wondering about.
Helen
--
Helen Bates
Belleville, Ontario, Canada
Clayarters' URLs: http://amsterlaw.com/clayart/
>
>-----Original Message-----
>From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Beverlin's Rare
>Sent: Friday, September 22, 2006 21:37
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: potters studio and or equipment for sale
>
>I have a complete studio set up and ready to go for sale. All or part.
>Chemicals at 20% less than any current published price. Some of the
>equipment available is a pugmil, air release mold press, two wheels, slab
>roller, and extruder. Please e-mail me off clayart for details at
>rarearthpottery@yahoo.com.
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
---------------------------------
Do you Yahoo!?
Get on board. You're invited to try the new Yahoo! Mail.
Victoria Hamilton on sat 23 sep 06
Thank you, Helen.
Probably an indication of my lack of search savvy.
Vicki Hamilton
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Helen Bates
Sent: Saturday, September 23, 2006 18:10
To: CLAYART@LSV.CERAMICS.ORG
Subject: Re: potters studio and or equipment for sale
On Sat, 23 Sep 2006 09:10:50 -0700, Victoria Hamilton
wrote:
>Where are you located? This would be useful information.
To Vicki and others with the same or similar questions,
It would be much better if this Clayarter had mentioned location, name, and
so-on. However... googling the poster's username rarearthpottery results in
several relevant hits.
The second one points to Bill Amsterlaw's and my site for Clayarters' URLs
which includes two web addresses for this poster. The first url isn't
working right now, but the second, located at tripod.com is still available
as I write. You can browse through the site and get the information you're
wondering about.
Helen
--
Helen Bates
Belleville, Ontario, Canada
Clayarters' URLs: http://amsterlaw.com/clayart/
>
>-----Original Message-----
>From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Beverlin's
>Rare
>Sent: Friday, September 22, 2006 21:37
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: potters studio and or equipment for sale
>
>I have a complete studio set up and ready to go for sale. All or part.
>Chemicals at 20% less than any current published price. Some of the
>equipment available is a pugmil, air release mold press, two wheels,
>slab roller, and extruder. Please e-mail me off clayart for details at
>rarearthpottery@yahoo.com.
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Nancy Braches on sat 23 sep 06
where are you located?
Beverlin's Rare wrote: I have a complete studio set up and ready to go for
sale. All or part. Chemicals at 20% less than any
current published price. Some of the equipment
available is a pugmil, air release mold press, two
wheels, slab roller, and extruder. Please e-mail me
off clayart for details at rarearthpottery@yahoo.com.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
Kathy Stecker on sat 23 sep 06
Since you haven't listed your location anywhere -can you please tell us
where you are in the USA, Canada, Belgium, India etc? Thanks-It'll be easier to
sell your stuff. Usually people post their name and location.
Kathy Stecker
Winter Springs, FL
USA
Victoria Hamilton on sat 23 sep 06
Where are you located? This would be useful information.
Vicki Hamilton
Millennia Antica Pottery
Seattle, WA
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Beverlin's Rare
Sent: Friday, September 22, 2006 21:37
To: CLAYART@LSV.CERAMICS.ORG
Subject: potters studio and or equipment for sale
I have a complete studio set up and ready to go for sale. All or part.
Chemicals at 20% less than any current published price. Some of the
equipment available is a pugmil, air release mold press, two wheels, slab
roller, and extruder. Please e-mail me off clayart for details at
rarearthpottery@yahoo.com.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Helen Bates on sat 23 sep 06
On Sat, 23 Sep 2006 09:10:50 -0700, Victoria Hamilton
wrote:
>Where are you located? This would be useful information.
To Vicki and others with the same or similar questions,
It would be much better if this Clayarter had mentioned location, name, and
so-on. However... googling the poster's username rarearthpottery results in
several relevant hits.
The second one points to Bill Amsterlaw's and my site for Clayarters' URLs
which includes two web addresses for this poster. The first url isn't
working right now, but the second, located at tripod.com is still available
as I write. You can browse through the site and get the information you're
wondering about.
Helen
--
Helen Bates
Belleville, Ontario, Canada
Clayarters' URLs: http://amsterlaw.com/clayart/
>
>-----Original Message-----
>From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Beverlin's Rare
>Sent: Friday, September 22, 2006 21:37
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: potters studio and or equipment for sale
>
>I have a complete studio set up and ready to go for sale. All or part.
>Chemicals at 20% less than any current published price. Some of the
>equipment available is a pugmil, air release mold press, two wheels, slab
>roller, and extruder. Please e-mail me off clayart for details at
>rarearthpottery@yahoo.com.
Helen Bates on sun 24 sep 06
On Sat, 23 Sep 2006 21:15:07 -0700, Nancy Braches
wrote:
>Looks like she is in Burien, Washington....way too far from NY :(
>
>Nancy
Nancy, I was referring to the original poster. You can see in the header of
that post that her name surname is Beverlin and that her username is
rarearthpottery. She lives in Missouri, still pretty far from NY!
I don't know what her reason is for not posting at least a general
indication of her location, but she's done it other times and had the same
questions asked and not responded (any more than she has this time.)
Apparently she doesn't feel it's an imposition to ask people to e-mail her
off-line from all over the country.
Anyway, even better than searching through the page we have at
http://amsterlaw.com/clayart.txt, if you Google her username, then go to the
second page of the results, you'll find the Yellow Pages listing for her
business.
You can also jump to Ms Beverlin on our javascript Clayarters Websites page:
http://amsterlaw.com/clayart/ by loading it then typing in ?beverlin in the
address window immediately to the right of the url.
Don't type while the address is highlighted; click on the url then click
again until all the highlighting is turned off, then move the cursor to the
right-hand end and type ?beverlin.
It will look like this: http://amsterlaw.com/clayart.html?beverlin
Have fun!
Helen (enjoying a breezy return of summer weather)
--
Helen Bates
Belleville, Ontario, Canada
Clayarters' URLs: http://amsterlaw.com/clayart/
>
>Helen Bates wrote: On Sat, 23 Sep 2006 09:10:50
-0700, Victoria Hamilton
> wrote:
>
>>Where are you located? This would be useful information.
>
>To Vicki and others with the same or similar questions,
>
>It would be much better if this Clayarter had mentioned location, name, and
>so-on. However... googling the poster's username rarearthpottery results in
>several relevant hits.
>
>The second one points to Bill Amsterlaw's and my site for Clayarters' URLs
>which includes two web addresses for this poster. The first url isn't
>working right now, but the second, located at tripod.com is still available
>as I write. You can browse through the site and get the information you're
>wondering about.
>
>Helen
>--
>Helen Bates
>Belleville, Ontario, Canada
>Clayarters' URLs: http://amsterlaw.com/clayart/
>
>>
>>-----Original Message-----
>>From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Beverlin's Rare
>>Sent: Friday, September 22, 2006 21:37
>>To: CLAYART@LSV.CERAMICS.ORG
>>Subject: potters studio and or equipment for sale
>>
>>I have a complete studio set up and ready to go for sale. All or part.
>>Chemicals at 20% less than any current published price. Some of the
>>equipment available is a pugmil, air release mold press, two wheels, slab
>>roller, and extruder. Please e-mail me off clayart for details at
>>rarearthpottery@yahoo.com.
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
>
>
>---------------------------------
>Do you Yahoo!?
> Get on board. You're invited to try the new Yahoo! Mail.
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Beverlin's Rare on wed 27 sep 06
Please excuse me if I have allready replied to your
e-mail.
I HAVE HAD MANY REQUESTS FOR INFORMATION. THIS IS THE
LIST I AM READY TO PART WITH AND PRICES. BUT NO
REASONABLE OFFER WILL BE REFUSE.
I am located in North Central Missouri. Every last
thing in the studio is for sale. Walker Pug mill 600.
Wheels Creative Industries 600. Pacifica original
500.
Slab Roller North Star Super Duty 30 inch 600. Scott
Creek Extruder, expansion box and all the dies 450.
Tile press without air compressor but everything else
I have on hand for making the molds, the frames, the
special plaster, air line etc for 600. I have loads
of chemicals as well you name I have it at 20 percent
off any current published price. I have corks, and
pumps, candles, wax, it all goes. So if you have a
need let me know I probably have it.
I also have a modified Minnesota Flat Kiln for sale
with some new brick as well. And a small raku kiln.
Have a super sunshine day and respond off site at
rarearthpottery@yahoo.com
--- Helen Bates wrote:
> On Sat, 23 Sep 2006 09:10:50 -0700, Victoria
> Hamilton
> wrote:
>
> >Where are you located? This would be useful
> information.
>
> To Vicki and others with the same or similar
> questions,
>
> It would be much better if this Clayarter had
> mentioned location, name, and
> so-on. However... googling the poster's username
> rarearthpottery results in
> several relevant hits.
>
> The second one points to Bill Amsterlaw's and my
> site for Clayarters' URLs
> which includes two web addresses for this poster.
> The first url isn't
> working right now, but the second, located at
> tripod.com is still available
> as I write. You can browse through the site and get
> the information you're
> wondering about.
>
> Helen
> --
> Helen Bates
> Belleville, Ontario, Canada
> Clayarters' URLs: http://amsterlaw.com/clayart/
>
> >
> >-----Original Message-----
> >From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On
> Behalf Of Beverlin's Rare
> >Sent: Friday, September 22, 2006 21:37
> >To: CLAYART@LSV.CERAMICS.ORG
> >Subject: potters studio and or equipment for sale
> >
> >I have a complete studio set up and ready to go for
> sale. All or part.
> >Chemicals at 20% less than any current published
> price. Some of the
> >equipment available is a pugmil, air release mold
> press, two wheels, slab
> >roller, and extruder. Please e-mail me off clayart
> for details at
> >rarearthpottery@yahoo.com.
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Leta Medina on thu 28 sep 06
Thank you but the shipping would be extradonary. I'm located on the west coast.
Thank you again,
Leta
Beverlin's Rare wrote:
Please excuse me if I have allready replied to your
e-mail.
I HAVE HAD MANY REQUESTS FOR INFORMATION. THIS IS THE
LIST I AM READY TO PART WITH AND PRICES. BUT NO
REASONABLE OFFER WILL BE REFUSE.
I am located in North Central Missouri. Every last
thing in the studio is for sale. Walker Pug mill 600.
Wheels Creative Industries 600. Pacifica original
500.
Slab Roller North Star Super Duty 30 inch 600. Scott
Creek Extruder, expansion box and all the dies 450.
Tile press without air compressor but everything else
I have on hand for making the molds, the frames, the
special plaster, air line etc for 600. I have loads
of chemicals as well you name I have it at 20 percent
off any current published price. I have corks, and
pumps, candles, wax, it all goes. So if you have a
need let me know I probably have it.
I also have a modified Minnesota Flat Kiln for sale
with some new brick as well. And a small raku kiln.
Have a super sunshine day and respond off site at
rarearthpottery@yahoo.com
--- Helen Bates wrote:
> On Sat, 23 Sep 2006 09:10:50 -0700, Victoria
> Hamilton
> wrote:
>
> >Where are you located? This would be useful
> information.
>
> To Vicki and others with the same or similar
> questions,
>
> It would be much better if this Clayarter had
> mentioned location, name, and
> so-on. However... googling the poster's username
> rarearthpottery results in
> several relevant hits.
>
> The second one points to Bill Amsterlaw's and my
> site for Clayarters' URLs
> which includes two web addresses for this poster.
> The first url isn't
> working right now, but the second, located at
> tripod.com is still available
> as I write. You can browse through the site and get
> the information you're
> wondering about.
>
> Helen
> --
> Helen Bates
> Belleville, Ontario, Canada
> Clayarters' URLs: http://amsterlaw.com/clayart/
>
> >
> >-----Original Message-----
> >From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On
> Behalf Of Beverlin's Rare
> >Sent: Friday, September 22, 2006 21:37
> >To: CLAYART@LSV.CERAMICS.ORG
> >Subject: potters studio and or equipment for sale
> >
> >I have a complete studio set up and ready to go for
> sale. All or part.
> >Chemicals at 20% less than any current published
> price. Some of the
> >equipment available is a pugmil, air release mold
> press, two wheels, slab
> >roller, and extruder. Please e-mail me off clayart
> for details at
> >rarearthpottery@yahoo.com.
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
| |
|
