Judy Picard on sun 26 nov 06
I have an oportunity to buy an A66 Paragon kiln for $25. It only has a 3-st=
ep dial and plug in for another section. It has no kiln sitter or timer. =
=0A=0AWould it be worth my while to tear apart the cage/box and replace it =
with a new one? Where would I buy the new/used box with kiln sitter?=0A=0At=
hanks,=0Ajudy=0A=0A=0A=0A =0A______________________________________________=
______________________________________=0AWant to start your own business?=
=0ALearn how on Yahoo! Small Business.=0Ahttp://smallbusiness.yahoo.com/r-i=
ndex
Michael Wendt on mon 27 nov 06
Judy,
You can add a Bartlett controller for about
$250 if you are capable of building the rest
of the unit from components.
Modular controls are available from
Seattle Pottery Supply for around
$550.
Contact Dawson directly to get a
kiln sitter if you believe you must
have one. I don't think you need one
if you fire attended since you will
watch the witness cones anyway.
Regards,
Michael Wendt
Wendt Pottery
2729 Clearwater Ave
Lewiston, Idaho 83501
USA
wendtpot@lewiston.com
www.wendtpottery.com
Judy wrote:
I have an opportunity to buy an A66 Paragon kiln for
$25. It only has a 3-step dial and plug in for another
section. It has no kiln sitter or timer.
Would it be worth my while to tear apart the cage/box
and replace it with a new one? Where would I buy the
new/used box with kiln sitter?
thanks,
judy
| |
|
