search  current discussion  categories  techniques - photography 

sony cameras also canon

updated sun 11 feb 07

 

Scott Harrison on sat 10 feb 07


Canon has found that its Sony made CCD-based digital cameras and
camcorders are affected by high temperature and humidity, causing
some wiring to come loose. As a result, the cameras stop recording or
record distorted images. The models with the problem are:

Digital Cameras
PowerShot A60, A70, A75
PowerShot A300, A310
Digital IXUS V3, IXUS II, IXUS IIs

Digital Video Cameras
MV600i, MV630i, MV650i
MV700i, MV730i, MV750i
MV5i, MV5i MC
MV6i MC
ZR60, ZR65 MC, ZR70 MC, ZR80, ZR85, ZR90
Elura 40 MC, Elura 50

More info at consumer.usa.canon.com

Scott Harrison
South Fork High School
Humboldt Redwoods CA


On Feb 9, 2007, at 6:16 PM, Fred Parker wrote:

> This is VERY important information for anyone owning a Sony Cyber Shot
> camera. I had to discover it by accident. Apparently Sony does not
> actively publicize it:
>
> Certain Sony "Cyber Shot" cameras were manufactured with a defect
> somewhere in their CCD devices. They will work beautifully up to a
> point,
> then either stop working altogether, or begin producing a
> psychedelic-type
> distortion in every image. My DSC-F717 made it three years, then went
> psychedelic overnight. I was ready to write it off rather than pay
> the
> $200 a repair on the three year-old camera would have cost.
>
> Then I happened to see an announcement on the crawler at the bottom
> of a
> TV screen that Sony had a huge recall on these cameras. I only saw it
> once, and I watched the same channel for hours hoping to see it
> again, but
> never did. If you have one of the defective models, Sony will
> repair it
> for free.
>
> Go to the Sony web site for more infoprmation, including a diagnostics
> routine and a link to get a UPS shipping label to return defective
> cameras
> to Sony. It took about ten days to get mine shipped off, repaired and
> returned. No charge at all.
>
> Fred Parker
>
> ______________________________________________________________________
> ________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>