Nathan Gartz on sat 13 oct 07
Hello all!
I am looking to buy a small electric kiln to fire crystalline tests in. I'm
going to be a bit picky with this one so I'm sure I won't receive all that
many responses, but it's worth a shot so here it goes.
I'm looking to get a used electric test kiln that is rated for cone 10.
Something like L&L's Liberty-Belle or Skutt's KM818. I work for the
University of Milwaukee's Studio Arts and Craft Centre so if you would be
willing to donate it, it would be tax-deductible. Otherwise, I would have
to shell out the cash for it myself since funds are limited at the job so I
could only afford a few hundred bucks.
If you have a larger cone 10 kiln for cheap around the midwest, I might be
interested in that also.
Thanks,
Nathan
WJ Seidl on sat 13 oct 07
Nathan:
Might I suggest Paragon's "Caldera"? Very small, runs on regular 120V
fires to ^10. They're running around $338 delivered (new) from people
like Clay-King.
Check around, you might find a better price.
Just a thought.
Best,
Wayne Seidl
Nathan Gartz wrote:
> Hello all!
>
> I am looking to buy a small electric kiln to fire crystalline tests in. I'm
> going to be a bit picky with this one so I'm sure I won't receive all that
> many responses, but it's worth a shot so here it goes.
>
> I'm looking to get a used electric test kiln that is rated for cone 10.
> Something like L&L's Liberty-Belle or Skutt's KM818. I work for the
> University of Milwaukee's Studio Arts and Craft Centre so if you would be
> willing to donate it, it would be tax-deductible. Otherwise, I would have
> to shell out the cash for it myself since funds are limited at the job so I
> could only afford a few hundred bucks.
>
> If you have a larger cone 10 kiln for cheap around the midwest, I might be
> interested in that also.
>
> Thanks,
>
> Nathan
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, or change your
> subscription settings here: http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots2@visi.com
>
>
| |
|
