Sherri Grossbauer on tue 19 sep 00
AIM KILN MANUFACTURING CO
369 Main ST
Ramona, CA 92065
800/647-1624
On Tue, 19 Sep 2000, cHuCk wrote:
> Does anyone have the address/phone for AIM. We need to get some new "S" type thermocouples and I can't seem to turn it up right now. (Yes, my studio is a little disorgainzed...but the floor is clean and neat.)
>
> Thanks in advance,
>
> Chuck
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
cHuCk on tue 19 sep 00
Thanks, The 800 number was disconnected, but I got through at 541-758-8133
Not buying a kiln, just needed some "S" type thermocouples and a couple of
replacement protection tubes.
Thanks again,
Chuck
> Chuck,
> Aim Kilns
> 350 S.W.Wake Robin Ave.
> Corvallis, Oregon 97333
>
> 1800-Aim Kilns
> Just got my Aim kiln after a seven month wait, hope you don't have the
same
> problem.
who may be reached at melpots@pclink.com.
cHuCk on tue 19 sep 00
Does anyone have the address/phone for AIM. We need to get some new =
"S" type thermocouples and I can't seem to turn it up right now. (Yes, =
my studio is a little disorgainzed...but the floor is clean and neat.)
Thanks in advance,
Chuck
Chris Clarke on tue 19 sep 00
Chuck,
Aim Kilns
350 S.W.Wake Robin Ave.
Corvallis, Oregon 97333
1800-Aim Kilns
Just got my Aim kiln after a seven month wait, hope you don't have the same
problem.
chris clarke
Temecula, CA
chris@ccpots.com
www.ccpots.com
look again
----- Original Message -----
From: cHuCk
To:
Sent: Tuesday, September 19, 2000 5:00 AM
Subject: Address/Phone for AIM
Does anyone have the address/phone for AIM. We need to get some new "S"
type thermocouples and I can't seem to turn it up right now. (Yes, my studio
is a little disorgainzed...but the floor is clean and neat.)
Thanks in advance,
Chuck
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
June Perry on tue 19 sep 00
Here's an email for them that i got using a search engine:
flclay@worldramp.net
If you get a phone number, would you please post it.
Regards,
June
Bill Raymond on tue 19 sep 00
Try calling 1-800-clayusa it's the number for Minasota Clay they're an Aim
dealer they should be able to give the factery number. Josie
-----Original Message-----
From: cHuCk
To: CLAYART@LSV.CERAMICS.ORG
Date: Tuesday, September 19, 2000 8:46 AM
Subject: Address/Phone for AIM
Does anyone have the address/phone for AIM. We need to get some new "S"
type thermocouples and I can't seem to turn it up right now. (Yes, my studio
is a little disorgainzed...but the floor is clean and neat.)
Thanks in advance,
Chuck
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
| |
|
