Jeremy/Bonnie Hellman on sun 21 oct 01
I would like to pay someone to make me several dies for my Bailey extruder.
I have both the square 4" barrel and their expansion box. (Is it 8" or 9"?)
Yes, I'm sure I COULD make my own, but I don't want to. Unless it turns out
to be prohibitively expensive, I'd like to find someone to make them so that
I can use them no later than November 16th.
If you know someone or a company, or you're interested, you may contact me
on clayart, or privately. One die will be a foot ring die (with perhaps
several foot ring shapes) and the other will be a shaped sidewall, a few
inches high.
I'd be happy to telephone you, if you send your phone number to me.
Bonnie
Bonnie Hellman
mou10man@sgi.net
in Pittsburgh, PA
David Hendley on tue 23 oct 01
Dear Bonnie, I will make your dies for you, but, be aware, you
might be subject to public castigation on Clayart for not making
your own.
It sounds like you only need simple, small dies for the 4" barrel.
Shouldn't take too long.
I will use genuine Texas road signs.
David Hendley
Maydelle, Texas
hendley@tyler.net
http://www.farmpots.com
----- Original Message -----
From: "Jeremy/Bonnie Hellman"
To:
Sent: Sunday, October 21, 2001 7:26 PM
Subject: Die Maker Wanted
> I would like to pay someone to make me several dies for my Bailey
extruder.
> I have both the square 4" barrel and their expansion box. (Is it 8" or
9"?)
>
> Yes, I'm sure I COULD make my own, but I don't want to. Unless it turns
out
> to be prohibitively expensive, I'd like to find someone to make them so
that
> I can use them no later than November 16th.
>
> If you know someone or a company, or you're interested, you may contact me
> on clayart, or privately. One die will be a foot ring die (with perhaps
> several foot ring shapes) and the other will be a shaped sidewall, a few
> inches high.
>
> I'd be happy to telephone you, if you send your phone number to me.
>
> Bonnie
>
> Bonnie Hellman
> mou10man@sgi.net
> in Pittsburgh, PA
John Baymore on wed 24 oct 01
It sounds like you only need simple, small dies for the 4" barrel.
Shouldn't take too long. I will use genuine Texas road signs.
Bonnie,
Hey.... hot tip here.........
Don't take David up on the offer. He's a wanted man by the Texas DPW. >
They'll get you for recieving stolen goods too. Besides..... having that=
bright yellow paint around the studio can have a terrible influence on yo=
u.
Pretty soon you'll be making bright colored pots .
Best,
..............................john
John Baymore
River Bend Pottery
22 Riverbend Way
Wilton, NH 03086 USA
603-654-2752 (s)
800-900-1110 (s)
JohnBaymore.com
JBaymore@compuserve.com
John.Baymore@GSD-CO.com
"Earth, Water, and Fire Noborigama Woodfiring Workshop 2002 Dates TBA"=
| |
|
