Rogene Schorer on thu 23 sep 04
Hubby checked the motor again . . . decided it couldn't be more than 1/3 HP . . . It's not labeled.
Rogene
Rogene Schorer wrote:
Hi all,
I'm a newbie here! . . .
I'm getting back to pottery after a long break . . . I have an old Craftool Pottery wheel that would work great, if it wasn't for a broken foot pedal. The broken part was very fragile and cannot be repaired.
It's possible that a foot pedal from another wheel would work . . . hubby is an electrical engineer who can fix most things.
What he tells me is that I need a DC electronic speed control that works with a 10 amp load. Motor is 3/4 HP. There are three wires coming from the pedal - one to the switch/fuse (black).
If anyone has a foot pedal that may work, please let me know.
Thanks,
Rogene
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
---------------------------------
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
| |
|
